Skip to content

Pounds per square inch to Pascals Converter

1 psi = 6894.76 Pa (pound per square inchpascal)

1 psi = 6894.76 Pa

1 pound per square inch equals 6894.76 pascals. To convert pounds per square inch to pascals, multiply the pound per square inch value by 6894.76. For quick reference: 1 psi = 6894.76 Pa, 5 psi = 34473.8 Pa, 10 psi = 68947.6 Pa, 100 psi = 689476 Pa.

6894.76
FormulaPascals = Pounds per square inch × 6894.76
Quick

When to use pounds per square inchpascals

PSI to pascals multiplies by 6,894.757 (1 psi = 6,894.757293168361 Pa exactly). A 32 psi tyre is 220,632 Pa; a 3,000 psi pressure-washer rating is about 20.7 million Pa. The conversion carries US automotive, plumbing, and hydraulic specs into base SI units for engineering calculations. Check whether the source figure is gauge or absolute: US gauges read psig, pressure above atmospheric, so an absolute-pressure formula needs roughly 101,325 Pa added before the physics comes out right.

Process-control engineers specifying fine differential-pressure transmitters work in pascals for the sensor's native resolution, even when the surrounding plant is rated in psi. A tiny 0.1 psi differential — enough to trigger a filter-change alarm — is 689.5 Pa; a 5 psi low-pressure gas line is 34,474 Pa. Because psi is a coarse unit at this scale, HVAC and cleanroom instrumentation almost always reports natively in pascals, and cross-checking a psi-labelled nameplate against a pascal sensor needs the precise 6,894.757 factor to avoid a tenfold misread.

How to convert pounds per square inch to pascals

  1. Take your value

    Start with your value in pounds per square inch.

  2. Multiply by 6894.76

    Multiply the pound per square inch value by 6894.76. This is the exact conversion factor from pounds per square inch to pascals.

  3. Read the result

    The product is your value in pascals. For example, 5 psi × 6894.76 = 34473.8 Pa.

Conversion formula

The exact factor from pounds per square inch to pascals is 6894.76.

Pascals = Pounds per square inch × 6894.76

Pounds per square inch to Pascals conversion table

Fifty common reference values, hand-picked for skim utility. Use the calculator above for any value not listed.

Conversion table from pounds per square inch to pascals
Pounds per square inch (psi)Pascals (Pa)
0.001 psi6.8948 Pa
0.01 psi68.948 Pa
0.1 psi689.48 Pa
0.5 psi3447.4 Pa
1 psi6894.8 Pa
1.5 psi10342 Pa
2 psi13790 Pa
2.5 psi17237 Pa
3 psi20684 Pa
4 psi27579 Pa
5 psi34474 Pa
6 psi41369 Pa
7 psi48263 Pa
8 psi55158 Pa
9 psi62053 Pa
10 psi68948 Pa
14 psi96527 Pa
15 psi103421 Pa
20 psi137895 Pa
25 psi172369 Pa
30 psi206843 Pa
32 psi220632 Pa
35 psi241317 Pa
40 psi275790 Pa
50 psi344738 Pa
60 psi413685 Pa
75 psi517107 Pa
80 psi551581 Pa
100 psi689476 Pa
101.325 psi698611 Pa
150 psi1034214 Pa
200 psi1378951 Pa
250 psi1723689 Pa
300 psi2068427 Pa
400 psi2757903 Pa
500 psi3447379 Pa
760 psi5240016 Pa
1000 psi6894757 Pa
1013.25 psi6986113 Pa
2000 psi13789515 Pa
5000 psi34473786 Pa
10000 psi68947573 Pa
14.7 psi101353 Pa
50000 psi344737865 Pa
100000 psi689475729 Pa
101325 psi698611283 Pa
200000 psi1378951459 Pa
500000 psi3447378647 Pa
1000000 psi6894757293 Pa
10000000 psi68947572932 Pa

Real-world reference

Most US passenger-car tires call for 32–35 psi. A typical bicycle tire runs 50–80 psi. In pascals, that gives you: 1 psi = 6894.76 Pa, 10 psi = 68947.6 Pa, 100 psi = 689476 Pa.

Frequently asked questions

How many pascals are in 1 pound per square inch?
1 pound per square inch equals 6894.76 pascals.
How do I convert pounds per square inch to pascals?
Multiply the pound per square inch value by 6894.76. So x psi × 6894.76 = the equivalent in Pa.
What is 5 pounds per square inch in pascals?
5 pounds per square inch equals 34473.8 pascals.
What is 10 pounds per square inch in pascals?
10 pounds per square inch equals 68947.6 pascals.
What is 100 pounds per square inch in pascals?
100 pounds per square inch equals 689476 pascals.
How do I convert back from pascals to pounds per square inch?
Multiply the pascal value by 0.000145038. For example, 1 Pa = 0.000145038 psi.
Is the pound per square inch bigger than the pascal?
Yes. 1 pound per square inch is larger than 1 pascal — specifically 6894.76 times larger.
Are these conversion factors exact?
The factor is derived directly from the SI definitions of pound per square inch and pascal; the displayed value is rounded for readability, and the browser computes using IEEE 754 double-precision arithmetic.

About the pound per square inch and the pascal

The pound per square inch

The pound per square inch (psi) is the customary US pressure unit, derived from the avoirdupois pound-force on a square inch (≈ 6,894.76 Pa exactly). It is the standard unit on US car tire-pressure stickers, scuba gauges in the US, and most plumbing specifications.

The pascal

The pascal (Pa) is the SI derived unit of pressure, defined as one newton per square meter. It is the universal unit in physics and engineering documentation. In everyday life pascals are tiny — atmospheric pressure is around 101,000 Pa — so multiples like kPa and MPa dominate practical use.

Sources